Project: Advanced Lane Finding¶
The steps of this project are the following:
- Compute the camera calibration matrix and distortion coefficients given a set of chessboard images.
- Apply a distortion correction to raw images.
- Use color transforms, gradients, etc., to create a thresholded binary image.
- Apply a perspective transform to rectify binary image ("birds-eye view").
- Detect lane pixels and fit to find the lane boundary.
- Determine the curvature of the lane and vehicle position with respect to center.
- Warp the detected lane boundaries back onto the original image.
- Output visual display of the lane boundaries and numerical estimation of lane curvature and vehicle position.
Part 1: Pipeline of Advanced Lane Finding on Images (experiment)¶
Camera Calibration¶
In [1]:
# Compute the camera calibration matrix and
# distortion coefficients given a set of chessboard images
import numpy as np
import cv2
import matplotlib.pyplot as plt
import matplotlib.image as mpimg
import glob
# Arrays to store object points and image points from all the images
objpoints = [] # 3d points in real world space
imgpoints = [] # 2d points in image plane.
# prepare object points
nx = 9
ny = 6
objp = np.zeros((nx*ny,3), np.float32)
objp[:,:2] = np.mgrid[0:nx,0:ny].T.reshape(-1,2)
# Make a list of calibration images
fnames = glob.glob('camera_cal/calibration*.jpg')
# Step through the list and search for chessboard corners
for fname in fnames:
img = cv2.imread(fname)
# Convert to grayscale
gray = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)
# Find the chessboard corners
ret, corners = cv2.findChessboardCorners(gray, (nx,ny),None)
# If found, draw corners
if ret == True:
# Draw and display the corners
objpoints.append(objp)
imgpoints.append(corners)
cv2.drawChessboardCorners(img, (nx, ny), corners, ret)
plt.imshow(img)
# Use cv2.calibrateCamera() and cv2.undistort()
ret, mtx, dist, rvecs, tvecs = cv2.calibrateCamera(objpoints,imgpoints,gray.shape[::-1],None,None)
Test the result of Camera Calibration¶
In [2]:
#test the camera calibration works or not
img = mpimg.imread('camera_cal/calibration3.jpg')
undistorted = cv2.undistort(img, mtx, dist, None, mtx)
f, (ax1, ax2) = plt.subplots(1, 2, figsize=(24, 9))
f.tight_layout()
ax1.imshow(img)
ax1.set_title('Original Image', fontsize=36)
ax2.imshow(undistorted)
ax2.set_title('Undistorted Image', fontsize=36)
plt.subplots_adjust(left=0., right=1, top=0.9, bottom=0.)
mpimg.imsave("output_images/original_image",img)
mpimg.imsave('output_images/undistorted_image',undistorted)
Threshoding Binary Image for Color and Gradients¶
In [3]:
# Use color transforms, gradients, etc., to create a thresholded binary image.
image = mpimg.imread('test_images/test3.jpg')
# create color and gradient pipeline.
def pipeline(img, s_thresh=(130, 255), h_thresh=(15,100),sx_thresh=(20, 100)):
# get a copy of original image to manipulate
#img = np.copy(img)
## Gradient Space
# gray scale the image for gradient processing
gray = cv2.cvtColor(img, cv2.COLOR_RGB2GRAY)
# Sobel x, which pick up vertical lane lines
sobelx = cv2.Sobel(gray, cv2.CV_64F, 1, 0) # Take the derivative in x
abs_sobelx = np.absolute(sobelx) # Absolute x derivative to accentuate lines away from horizontal
scaled_sobel = np.uint8(255*abs_sobelx/np.max(abs_sobelx)) #gray scaled is (0,1), now convert back to (0,255)
# Threshold x gradient
sxbinary = np.zeros_like(scaled_sobel)
sxbinary[(scaled_sobel >= sx_thresh[0]) & (scaled_sobel <= sx_thresh[1])] = 1
## Color Space
# Convert to HLS color space and separate the l and s channel
# openCV automatically covert the image pixel from 256 to 8bit
hls = cv2.cvtColor(img, cv2.COLOR_RGB2HLS)
#l_channel = hls[:,:,1]
h_channel = hls[:,:,0]
s_channel = hls[:,:,2]
# Threshold color channel: s
s_binary = np.zeros_like(s_channel)
s_binary[(s_channel >= s_thresh[0]) & (s_channel <= s_thresh[1])] = 1
# h channel
h_binary = np.zeros_like(h_channel)
h_binary[(h_channel >= h_thresh[0]) & (h_channel <= h_thresh[1])] = 1
## Stack space and color channels together
# Stack each channel to view their individual contributions in green and blue respectively
# This returns a stack of the two binary images, whose components you can see as different colors
# color_binary = np.dstack(( np.zeros_like(sxbinary), sxbinary, s_binary, h_binary)) * 255
# Combine the two binary thresholds
combined_binary = np.zeros_like(sxbinary)
combined_binary[(s_binary == 1) |(h_binary == 1) | (sxbinary == 1)] = 1
return combined_binary
img_threaded = pipeline(image, s_thresh=(130, 255), h_thresh=(15,80), sx_thresh=(40, 100))
cv2.imwrite('output_images/threadholded_binary.png',img_threaded)
#result = cv2.undistort(img, mtx,dist, None, mtx)
# Plot the result
f, (ax1, ax2) = plt.subplots(1, 2, figsize=(20, 10))
f.tight_layout()
ax1.set_title('Original Image', fontsize=40)
ax1.imshow(image)
ax2.set_title('Combined S & L channel and gradient thresholds', fontsize=40)
plt.subplots_adjust(left=0., right=1, top=0.9, bottom=0.)
ax2.imshow(img_threaded,cmap='gray')
Out[3]:
Perspective Transform of Lane¶
In [4]:
# Apply a perspective transform to rectify binary image ("birds-eye view")
# Load our image
img = mpimg.imread('test_images/straight_lines1.jpg')
img_size = (img.shape[1],img.shape[0])
#top right, bottom right, bottom left, top left
src = np.float32([[705, 461],[999, 650],[303,650],[581, 462]])
dst = np.float32([[920,1],[920, 720],[320,720],[320,1]])
M = cv2.getPerspectiveTransform(src,dst)
Minv = cv2.getPerspectiveTransform(dst,src)
warped = cv2.warpPerspective(img_threaded,M,img_size,flags=cv2.INTER_LINEAR)
f, (ax1, ax2) = plt.subplots(1, 2, figsize=(24, 9))
f.tight_layout()
ax1.imshow(img)
ax1.set_title('Original Image', fontsize=40)
ax2.imshow(warped,cmap='gray')
ax2.set_title('Warped Image', fontsize=40)
plt.subplots_adjust(left=0., right=1, top=0.9, bottom=0.)
Sliding Window: Detect Lane Pixels, Fit to Polynominal, and to Find Lane Boundary¶
In [5]:
# Detect lane pixels and fit to find the lane boundary.
# Load our image
binary_warped = warped
def find_lane_pixels(binary_warped):
# Take a histogram of the bottom half of the image
histogram = np.sum(binary_warped[binary_warped.shape[0]//2:,:], axis=0)
# Create an output image to draw on and visualize the result
out_img = np.dstack((binary_warped, binary_warped, binary_warped))
# Find the peak of the left and right halves of the histogram
# These will be the starting point for the left and right lines
midpoint = np.int(histogram.shape[0]//2)
leftx_base = np.argmax(histogram[:midpoint])
rightx_base = np.argmax(histogram[midpoint:]) + midpoint
# HYPERPARAMETERS
# Choose the number of sliding windows
nwindows = 9
# Set the width of the windows +/- margin
margin = 100
# Set minimum number of pixels found to recenter window
minpix = 50
# Set height of windows - based on nwindows above and image shape
window_height = np.int(binary_warped.shape[0]//nwindows)
# Identify the x and y positions of all nonzero pixels in the image
nonzero = binary_warped.nonzero()
nonzeroy = np.array(nonzero[0])
nonzerox = np.array(nonzero[1])
# Current positions to be updated later for each window in nwindows
leftx_current = leftx_base
rightx_current = rightx_base
# Create empty lists to receive left and right lane pixel indices
left_lane_inds = []
right_lane_inds = []
# Step through the windows one by one
for window in range(nwindows):
# Identify window boundaries in x and y (and right and left)
win_y_low = binary_warped.shape[0] - (window+1)*window_height
win_y_high = binary_warped.shape[0] - window*window_height
win_xleft_low = leftx_current - margin
win_xleft_high = leftx_current + margin
win_xright_low = rightx_current - margin
win_xright_high = rightx_current + margin
# Draw the windows on the visualization image
cv2.rectangle(out_img,(win_xleft_low,win_y_low),
(win_xleft_high,win_y_high),(0,255,0), 2)
cv2.rectangle(out_img,(win_xright_low,win_y_low),
(win_xright_high,win_y_high),(0,255,0), 2)
# Identify the nonzero pixels in x and y within the window
good_left_inds = ((nonzeroy >= win_y_low) & (nonzeroy < win_y_high) &
(nonzerox >= win_xleft_low) & (nonzerox < win_xleft_high)).nonzero()[0]
good_right_inds = ((nonzeroy >= win_y_low) & (nonzeroy < win_y_high) &
(nonzerox >= win_xright_low) & (nonzerox < win_xright_high)).nonzero()[0]
# Append these indices to the lists
left_lane_inds.append(good_left_inds)
right_lane_inds.append(good_right_inds)
# If you found > minpix pixels, recenter next window on their mean position
if len(good_left_inds) > minpix:
leftx_current = np.int(np.mean(nonzerox[good_left_inds]))
if len(good_right_inds) > minpix:
rightx_current = np.int(np.mean(nonzerox[good_right_inds]))
# Concatenate the arrays of indices (previously was a list of lists of pixels)
try:
left_lane_inds = np.concatenate(left_lane_inds)
right_lane_inds = np.concatenate(right_lane_inds)
except ValueError:
# Avoids an error if the above is not implemented fully
pass
# Extract left and right line pixel positions
leftx = nonzerox[left_lane_inds]
lefty = nonzeroy[left_lane_inds]
rightx = nonzerox[right_lane_inds]
righty = nonzeroy[right_lane_inds]
return leftx, lefty, rightx, righty, out_img
def fit_polynomial(binary_warped):
# Find our lane pixels first
leftx, lefty, rightx, righty, out_img = find_lane_pixels(binary_warped)
# Fit a second order polynomial to each using `np.polyfit`
left_fit = np.polyfit(lefty, leftx, 2)
right_fit = np.polyfit(righty, rightx, 2)
# Generate x and y values for plotting
ploty = np.linspace(0, binary_warped.shape[0]-1, binary_warped.shape[0] )
try:
left_fitx = left_fit[0]*ploty**2 + left_fit[1]*ploty + left_fit[2]
right_fitx = right_fit[0]*ploty**2 + right_fit[1]*ploty + right_fit[2]
except TypeError:
# Avoids an error if `left` and `right_fit` are still none or incorrect
print('The function failed to fit a line!')
left_fitx = 1*ploty**2 + 1*ploty
right_fitx = 1*ploty**2 + 1*ploty
## Visualization ##
# Colors in the left and right lane regions
out_img[lefty, leftx] = [255, 0, 0]
out_img[righty, rightx] = [0, 0, 255]
# Plots the left and right polynomials on the lane lines
plt.plot(left_fitx, ploty, color='yellow')
plt.plot(right_fitx, ploty, color='yellow')
return out_img,left_fitx,right_fitx,ploty,left_fit,right_fit
out_img,left_fitx,right_fitx,ploty,left_fit,right_fit = fit_polynomial(binary_warped)
plt.imshow(out_img)
Out[5]:
Get a New Binary Warped Image Before Processing Skip Sliding Windows Once Found the Lines¶
In [6]:
# Get a new binary warped image
# Apply a perspective transform to rectify binary image ("birds-eye view")
# Load our image
img = mpimg.imread('test_images/test4.jpg')
img_size = (img.shape[1],img.shape[0])
src = np.float32([[722, 470],[1110, 720],[220,720],[570, 470]])
dst = np.float32([[920,1],[920, 720],[320,720],[320,1]])
M = cv2.getPerspectiveTransform(src,dst)
Minv = cv2.getPerspectiveTransform(dst,src)
warped_2 = cv2.warpPerspective(img_threaded,M,img_size,flags=cv2.INTER_LINEAR)
cv2.imwrite('output_images/img_warped.jpg',warped_2)
f, (ax1, ax2) = plt.subplots(1, 2, figsize=(24, 9))
f.tight_layout()
ax1.imshow(img)
ax1.set_title('Original Image', fontsize=40)
ax2.imshow(warped_2,cmap='gray')
ax2.set_title('Second Warped Image', fontsize=40)
plt.subplots_adjust(left=0., right=1, top=0.9, bottom=0.)
Skip Sliding Windows Once Found the Lines¶
In [7]:
# Load our image - this should be a new frame since last time!
binary_warped = warped_2
# Polynomial fit values from the previous frame: left_fit, right_fit
def fit_poly(img_shape, leftx, lefty, rightx, righty):
# Fit a second order polynomial to each with np.polyfit()
# np.polyfit order is y first, then x
left_fit = np.polyfit(lefty,leftx,2)
right_fit = np.polyfit(righty,rightx,2)
# Generate x and y values for plotting
ploty = np.linspace(0, img_shape[0]-1, img_shape[0])
# Calc both polynomials using ploty, left_fit and right_fit
left_fitx = left_fit[0]*ploty**2 + left_fit[1]*ploty + left_fit[2]
right_fitx = right_fit[0]*ploty**2 + right_fit[1]*ploty + right_fit[2]
return left_fitx, right_fitx, ploty
def search_around_poly(binary_warped):
# HYPERPARAMETER
# Choose the width of the margin around the previous polynomial to search
margin = 100
# Grab activated pixels
nonzero = binary_warped.nonzero()
nonzeroy = np.array(nonzero[0])
nonzerox = np.array(nonzero[1])
# Set the area of search based on activated x-values
# within the +/- margin of our polynomial function
left_lane_inds = ((nonzerox > (left_fit[0]*(nonzeroy**2) + left_fit[1]*nonzeroy +
left_fit[2] - margin)) & (nonzerox < (left_fit[0]*(nonzeroy**2) +
left_fit[1]*nonzeroy + left_fit[2] + margin)))
right_lane_inds = ((nonzerox > (right_fit[0]*(nonzeroy**2) + right_fit[1]*nonzeroy +
right_fit[2] - margin)) & (nonzerox < (right_fit[0]*(nonzeroy**2) +
right_fit[1]*nonzeroy + right_fit[2] + margin)))
# Again, extract left and right line pixel positions
leftx = nonzerox[left_lane_inds]
lefty = nonzeroy[left_lane_inds]
rightx = nonzerox[right_lane_inds]
righty = nonzeroy[right_lane_inds]
# Fit new polynomials
left_fitx, right_fitx, ploty = fit_poly(binary_warped.shape, leftx, lefty, rightx, righty)
## Visualization ##
# Create an image to draw on and an image to show the selection window
out_img = np.dstack((binary_warped, binary_warped, binary_warped))*255
window_img = np.zeros_like(out_img)
# Color in left and right line pixels
out_img[nonzeroy[left_lane_inds], nonzerox[left_lane_inds]] = [255, 0, 0]
out_img[nonzeroy[right_lane_inds], nonzerox[right_lane_inds]] = [0, 0, 255]
# Generate a polygon to illustrate the search window area
# And recast the x and y points into usable format for cv2.fillPoly()
left_line_window1 = np.array([np.transpose(np.vstack([left_fitx-margin, ploty]))])
left_line_window2 = np.array([np.flipud(np.transpose(np.vstack([left_fitx+margin,
ploty])))])
left_line_pts = np.hstack((left_line_window1, left_line_window2))
right_line_window1 = np.array([np.transpose(np.vstack([right_fitx-margin, ploty]))])
right_line_window2 = np.array([np.flipud(np.transpose(np.vstack([right_fitx+margin,
ploty])))])
right_line_pts = np.hstack((right_line_window1, right_line_window2))
# Draw the lane onto the warped blank image
cv2.fillPoly(window_img, np.int_([left_line_pts]), (0,255, 0))
cv2.fillPoly(window_img, np.int_([right_line_pts]), (0,255, 0))
result = cv2.addWeighted(out_img, 1, window_img, 0.6, 0)
# Plot the polynomial lines onto the image
plt.plot(left_fitx, ploty, color='yellow')
plt.plot(right_fitx, ploty, color='yellow')
return result,left_fitx,right_fitx,ploty,left_fit,right_fit
# Run image through the pipeline
# Note that in your project, you'll also want to feed in the previous fits
result,left_fitx,right_fitx,ploty,left_fit,right_fit = search_around_poly(binary_warped)
# View your output
plt.imshow(result)
Out[7]:
Measure Radius of Curvatures¶
In [8]:
# Determine the curvature of the lane and vehicle position with respect to center
# we have polynomial fits and we can calculate the radius of curvature
# converting our x and y values to real world space in meters
def measure_curvature_real(left_fitx, right_fitx,ploty):
'''
Calculates the curvature of polynomial functions in meters.
'''
# Define conversions in x and y from pixels space to meters
# the physical lane is about 30 meters long and 3.7 meters wide
ym_per_pix = 30/720 # meters per pixel in y dimension
xm_per_pix = 3.7/700 # meters per pixel in x dimension
# Define y-value where we want radius of curvature
# We'll choose the maximum y-value, corresponding to the bottom of the image
y_eval = np.max(ploty)
# Fit a second order polynomial to pixel positions in each lane line
left_fit_cr = np.polyfit(ploty*ym_per_pix, left_fitx*xm_per_pix, 2)
right_fit_cr = np.polyfit(ploty*ym_per_pix, right_fitx*xm_per_pix, 2)
#ploty, left_fit_cr, right_fit_cr = generate_data(ym_per_pix, xm_per_pix)
# Calculation of R_curve (radius of curvature)
left_curverad = ((1 + (2*left_fit_cr[0]*y_eval*ym_per_pix + left_fit_cr[1])**2)**1.5) / np.absolute(2*left_fit_cr[0])
right_curverad = ((1 + (2*right_fit_cr[0]*y_eval*ym_per_pix + right_fit_cr[1])**2)**1.5) / np.absolute(2*right_fit_cr[0])
return left_curverad, right_curverad
# Calculate the radius of curvature in meters for both lane lines
left_curverad, right_curverad = measure_curvature_real(left_fitx, right_fitx,ploty)
print('left curvature: %.2f'% left_curverad, 'm', '; right curvature: %.2f' % right_curverad, 'm')
# Should see values of 533.75 and 648.16 here, if using
# the default `generate_data` function with given seed number
Find Center of Lane¶
In [9]:
# Distance from center is image height/2 - mean of left_fit and right_fit intercepts
binary_warped = warped_2
h = binary_warped.shape[0]
def find_lane_center(binary_img, l_fit, r_fit):
xm_per_pix = 3.7/700 # meters per pixel in x dimension
# if left_fitx is not None and right_fitx is not None:
if r_fit is not None and l_fit is not None:
car_position = binary_img.shape[1]/2
# l_fitx_int = l_fit[0]*h**2 + l_fit[1]*h + l_fit[2]
# r_fit_x_int = r_fit[0]*h**2 + r_fit[1]*h + r_fit[2]
l_fit_x_int = l_fit[0]*h**2 + l_fit[1]*h + l_fit[2]
r_fit_x_int = r_fit[0]*h**2 + r_fit[1]*h + r_fit[2]
# lane_center_position = (left_fitx + right_fitx) /2
lane_center_position = (r_fit_x_int + l_fit_x_int) /2
center_dist = (car_position - lane_center_position) * xm_per_pix
center_dist = (car_position - lane_center_position) * xm_per_pix
return center_dist
center_dist = find_lane_center(binary_warped, left_fit, right_fit)
print("the distance to the lane center is: %.2f" %center_dist, "m")
Draw the Detected Lane Boundaries onto the Original Image¶
In [10]:
# Warp the detected lane boundaries back onto the original image
# to draw the detected lanes back on to the undistorted image
stacked_img = np.dstack((warped_2, warped_2, warped_2))*255
num_rows = warped_2.shape[0]
img_size = (stacked_img.shape[1],stacked_img.shape[0])
y_points = np.linspace(0, num_rows-1, num_rows)
left_line_window = np.array(np.transpose(np.vstack([left_fitx, y_points])))
right_line_window = np.array(np.flipud(np.transpose(np.vstack([right_fitx, y_points]))))
line_points = np.vstack((left_line_window, right_line_window))
cv2.fillPoly(stacked_img, np.int_([line_points]), [0,255, 0])
# unwarped = cv2.warpPerspective(out_img, Minv, img_size , flags=cv2.INTER_LINEAR)
unwarped = cv2.warpPerspective(result, Minv, img_size , flags=cv2.INTER_LINEAR)
result = cv2.addWeighted(img, 1, unwarped, 0.3, 0) #img is the original image to draw on
plt.imshow(result)
Out[10]:
In [11]:
# Output visual display of the lane boundaries and numerical estimation
# of lane curvature and vehicle position
# image = mpimg.imread('test_images/test3.jpg')
image = result
def draw_data_on_lane(result_img, curv_rad, center_dist):
new_img = np.copy(result_img)
h = new_img.shape[0]
font = cv2.FONT_HERSHEY_DUPLEX
text = 'Curve radius: ' + '{:04.2f}'.format(curv_rad) + 'm'
cv2.putText(new_img, text, (40,70), font, 1.5, (200,255,155), 2, cv2.LINE_AA)
direction = ''
if center_dist > 0:
direction = 'right'
elif center_dist < 0:
direction = 'left'
abs_center_dist = abs(center_dist)
text = '{:04.3f}'.format(abs_center_dist) + 'm ' + direction + ' of center'
cv2.putText(new_img, text, (40,120), font, 1.5, (200,255,155), 2, cv2.LINE_AA)
return new_img
data_on_original_image = draw_data_on_lane(image, (left_curverad+ right_curverad)/2, center_dist)
plt.imshow(data_on_original_image)
Out[11]:
Part 2: Consolidate the Functions of Pipeline for Advance Lane Finding and Test on Images¶
In [1]:
import numpy as np
import cv2
import matplotlib.pyplot as plt
import matplotlib.image as mpimg
import glob
In [2]:
# func of camera calibration
def camera_calibration():
# Arrays to store object points and image points from all the images
objpoints = [] # 3d points in real world space
imgpoints = [] # 2d points in image plane.
# prepare object points
nx = 9
ny = 6
objp = np.zeros((nx*ny,3), np.float32)
objp[:,:2] = np.mgrid[0:nx,0:ny].T.reshape(-1,2)
# Make a list of calibration images
fnames = glob.glob('camera_cal/calibration*.jpg')
# Step through the list and search for chessboard corners
for fname in fnames:
img = cv2.imread(fname)
# Convert to grayscale
gray = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)
# Find the chessboard corners
ret, corners = cv2.findChessboardCorners(gray, (nx,ny),None)
# If found, draw corners
if ret == True:
# Draw and display the corners
objpoints.append(objp)
imgpoints.append(corners)
# cv2.drawChessboardCorners(img, (nx, ny), corners, ret)
# plt.imshow(img)
# Use cv2.calibrateCamera() and cv2.undistort()
ret, mtx, dist, rvecs, tvecs = cv2.calibrateCamera(objpoints,imgpoints,gray.shape[::-1],None,None)
return ret, mtx, dist, rvecs, tvecs
In [3]:
# func to create a color-and-gradient thresholded binary image
def get_threshold(img, s_thresh=(130, 255), h_thresh=(15,100),sx_thresh=(20, 100)):
## Gradient Space
# gray scale the image for gradient processing
gray = cv2.cvtColor(img, cv2.COLOR_RGB2GRAY)
# Sobel x, which pick up vertical lane lines
sobelx = cv2.Sobel(gray, cv2.CV_64F, 1, 0) # Take the derivative in x
abs_sobelx = np.absolute(sobelx) # Absolute x derivative to accentuate lines away from horizontal
scaled_sobel = np.uint8(255*abs_sobelx/np.max(abs_sobelx)) #gray scaled is (0,1), now convert back to (0,255)
# Threshold x gradient
sxbinary = np.zeros_like(scaled_sobel)
sxbinary[(scaled_sobel >= sx_thresh[0]) & (scaled_sobel <= sx_thresh[1])] = 1
## Color Space
# Convert to HLS color space and separate the l and s channel
# openCV automatically covert the image pixel from 256 to 8bit
hls = cv2.cvtColor(img, cv2.COLOR_RGB2HLS)
#l_channel = hls[:,:,1]
h_channel = hls[:,:,0]
s_channel = hls[:,:,2]
# Threshold color channel: s
s_binary = np.zeros_like(s_channel)
s_binary[(s_channel >= s_thresh[0]) & (s_channel <= s_thresh[1])] = 1
# h channel
h_binary = np.zeros_like(h_channel)
h_binary[(h_channel >= h_thresh[0]) & (h_channel <= h_thresh[1])] = 1
# Combine the two binary thresholds
combined_binary = np.zeros_like(sxbinary)
combined_binary[(s_binary == 1) |(h_binary == 1) | (sxbinary == 1)] = 1
return combined_binary
In [4]:
# func to crate warped image (birds-eye-view)
def warped_image(img, img_threaded):
img_size = (img.shape[1],img.shape[0])
# define 4 source points src = np.float32([[,],[,],[,],[,]])
# pick any four of the detected corners as long as those four corners define a rectangle
# use four well-chosen corners that were automatically detected during the undistortion steps
# define 4 destination points dst = np.float32([[,],[,],[,],[,]])
# use cv2.getPerspectiveTransform() to get M, the transform matrix
# use cv2.warpPerspective() to warp your image to a top-down view
src = np.float32([[722, 470],[1110, 720],[220,720],[570, 470]])
dst = np.float32([[920,1],[920, 720],[320,720],[320,1]])
M = cv2.getPerspectiveTransform(src,dst)
Minv = cv2.getPerspectiveTransform(dst,src)
warped = cv2.warpPerspective(img_threaded,M,img_size,flags=cv2.INTER_LINEAR)
return warped,Minv
In [5]:
def brute_search_lane_lines(binary_warped):
# Take a histogram of the bottom half of the image
histogram = np.sum(binary_warped[binary_warped.shape[0]//2:,:], axis=0)
# Create an output image to draw on and visualize the result
out_img = np.dstack((binary_warped, binary_warped, binary_warped))
# Find the peak of the left and right halves of the histogram
# These will be the starting point for the left and right lines
midpoint = np.int(histogram.shape[0]//2)
leftx_base = np.argmax(histogram[:midpoint])
rightx_base = np.argmax(histogram[midpoint:]) + midpoint
# HYPERPARAMETERS
# Choose the number of sliding windows
nwindows = 9
# Set the width of the windows +/- margin
margin = 100
# Set minimum number of pixels found to recenter window
minpix = 50
# Set height of windows - based on nwindows above and image shape
window_height = np.int(binary_warped.shape[0]//nwindows)
# Identify the x and y positions of all nonzero pixels in the image
nonzero = binary_warped.nonzero()
nonzeroy = np.array(nonzero[0])
nonzerox = np.array(nonzero[1])
# Current positions to be updated later for each window in nwindows
leftx_current = leftx_base
rightx_current = rightx_base
# Create empty lists to receive left and right lane pixel indices
left_lane_inds = []
right_lane_inds = []
# Step through the windows one by one
for window in range(nwindows):
# Identify window boundaries in x and y (right and left)
win_y_low = binary_warped.shape[0] - (window+1)*window_height
win_y_high = binary_warped.shape[0] - window*window_height
win_xleft_low = leftx_current - margin
win_xleft_high = leftx_current + margin
win_xright_low = rightx_current - margin
win_xright_high = rightx_current + margin
# Draw the windows on the visualization image
cv2.rectangle(out_img,(win_xleft_low,win_y_low),
(win_xleft_high,win_y_high),(0,255,0), 2)
cv2.rectangle(out_img,(win_xright_low,win_y_low),
(win_xright_high,win_y_high),(0,255,0), 2)
# Identify the nonzero pixels in x and y within the window
good_left_inds = ((nonzeroy >= win_y_low) & (nonzeroy < win_y_high) &
(nonzerox >= win_xleft_low) & (nonzerox < win_xleft_high)).nonzero()[0]
good_right_inds = ((nonzeroy >= win_y_low) & (nonzeroy < win_y_high) &
(nonzerox >= win_xright_low) & (nonzerox < win_xright_high)).nonzero()[0]
# Append these indices to the lists
left_lane_inds.append(good_left_inds)
right_lane_inds.append(good_right_inds)
# If you found > minpix pixels, recenter next window on their mean position
if len(good_left_inds) > minpix:
leftx_current = np.int(np.mean(nonzerox[good_left_inds]))
if len(good_right_inds) > minpix:
rightx_current = np.int(np.mean(nonzerox[good_right_inds]))
# Concatenate the arrays of indices (previously was a list of lists of pixels)
try:
left_lane_inds = np.concatenate(left_lane_inds)
right_lane_inds = np.concatenate(right_lane_inds)
except ValueError:
# Avoids an error if the above is not implemented fully
pass
# Extract left and right line pixel positions
leftx = nonzerox[left_lane_inds]
lefty = nonzeroy[left_lane_inds]
rightx = nonzerox[right_lane_inds]
righty = nonzeroy[right_lane_inds]
return leftx, lefty, rightx, righty, out_img
# func to fit polynominal to a warped image to find the lane boundary
def fit_polynomial_brute_search(binary_warped):
# Find our lane pixels first
leftx, lefty, rightx, righty, out_img = brute_search_lane_lines(binary_warped)
# Fit a second order polynomial to each using `np.polyfit`
left_fit = np.polyfit(lefty, leftx, 2)
right_fit = np.polyfit(righty, rightx, 2)
# Generate x and y values for plotting
ploty = np.linspace(0, binary_warped.shape[0]-1, binary_warped.shape[0] )
try:
left_fitx = left_fit[0]*ploty**2 + left_fit[1]*ploty + left_fit[2]
right_fitx = right_fit[0]*ploty**2 + right_fit[1]*ploty + right_fit[2]
except TypeError:
# Avoids an error if `left` and `right_fit` are still none or incorrect
print('The function failed to fit a line!')
left_fitx = 1*ploty**2 + 1*ploty
right_fitx = 1*ploty**2 + 1*ploty
return out_img,left_fitx,right_fitx,left_fit,right_fit,ploty #out_img: lane line fitted binary image
In [6]:
# func of polynomial fit to the new image using the values from the previous frame: left_fit, right_fit
# input warped_2 which is warped binary image
def fit_poly(img_shape, leftx, lefty, rightx, righty):
# Fit a second order polynomial to each with np.polyfit()
# np.polyfit order is y first, then x
left_fit = np.polyfit(lefty,leftx,2)
right_fit = np.polyfit(righty,rightx,2)
# Generate x and y values for plotting
ploty = np.linspace(0, img_shape[0]-1, img_shape[0])
# Calc both polynomials using ploty, left_fit and right_fit
left_fitx = left_fit[0]*ploty**2 + left_fit[1]*ploty + left_fit[2]
right_fitx = right_fit[0]*ploty**2 + right_fit[1]*ploty + right_fit[2]
return left_fitx, right_fitx, ploty
# func of searching a small margin instead of the whole width of the image for the next frame
def search_around_poly(warped_2,left_fit,right_fit):
# HYPERPARAMETER
# Choose the width of the margin around the previous polynomial to search
margin = 100
# Grab activated pixels
nonzero = warped_2.nonzero()
nonzeroy = np.array(nonzero[0])
nonzerox = np.array(nonzero[1])
# Set the area of search based on activated x-values
# within the +/- margin of our polynomial function
left_lane_inds = ((nonzerox > (left_fit[0]*(nonzeroy**2) + left_fit[1]*nonzeroy +
left_fit[2] - margin)) & (nonzerox < (left_fit[0]*(nonzeroy**2) +
left_fit[1]*nonzeroy + left_fit[2] + margin)))
right_lane_inds = ((nonzerox > (right_fit[0]*(nonzeroy**2) + right_fit[1]*nonzeroy +
right_fit[2] - margin)) & (nonzerox < (right_fit[0]*(nonzeroy**2) +
right_fit[1]*nonzeroy + right_fit[2] + margin)))
# Again, extract left and right line pixel positions
leftx = nonzerox[left_lane_inds]
lefty = nonzeroy[left_lane_inds]
rightx = nonzerox[right_lane_inds]
righty = nonzeroy[right_lane_inds]
# Fit new polynomials
left_fitx, right_fitx, ploty = fit_poly(warped_2.shape, leftx, lefty, rightx, righty)
## Visualization ##
# Create an image to draw on and an image to show the selection window
out_img = np.dstack((warped_2, warped_2, warped_2))*255
window_img = np.zeros_like(out_img)
# Color in left and right line pixels
out_img[nonzeroy[left_lane_inds], nonzerox[left_lane_inds]] = [255, 0, 0]
out_img[nonzeroy[right_lane_inds], nonzerox[right_lane_inds]] = [0, 0, 255]
# Generate a polygon to illustrate the search window area
# And recast the x and y points into usable format for cv2.fillPoly()
left_line_window1 = np.array([np.transpose(np.vstack([left_fitx-margin, ploty]))])
left_line_window2 = np.array([np.flipud(np.transpose(np.vstack([left_fitx+margin,
ploty])))])
left_line_pts = np.hstack((left_line_window1, left_line_window2))
right_line_window1 = np.array([np.transpose(np.vstack([right_fitx-margin, ploty]))])
right_line_window2 = np.array([np.flipud(np.transpose(np.vstack([right_fitx+margin,
ploty])))])
right_line_pts = np.hstack((right_line_window1, right_line_window2))
# Draw the lane onto the warped blank image
cv2.fillPoly(window_img, np.int_([left_line_pts]), (0,255, 0))
cv2.fillPoly(window_img, np.int_([right_line_pts]), (0,255, 0))
result = cv2.addWeighted(out_img, 1, window_img, 0.6, 0)
return result,left_fitx,right_fitx,left_fit,right_fit,ploty
In [7]:
# func of calculating left and right curvature in meters
def measure_curvature_real(left_fitx, right_fitx,ploty):
'''
Calculates the curvature of polynomial functions in meters.
'''
# Define conversions in x and y from pixels space to meters
# the physical lane is about 30 meters long and 3.7 meters wide
ym_per_pix = 30/720 # meters per pixel in y dimension
xm_per_pix = 3.7/700 # meters per pixel in x dimension
# Define y-value where we want radius of curvature
# We'll choose the maximum y-value, corresponding to the bottom of the image
y_eval = np.max(ploty)
# Fit a second order polynomial to pixel positions in each fake lane line
# Fit new polynomials to x,y in world space
left_fit_cr = np.polyfit(ploty*ym_per_pix, left_fitx*xm_per_pix, 2)
right_fit_cr = np.polyfit(ploty*ym_per_pix, right_fitx*xm_per_pix, 2)
#ploty, left_fit_cr, right_fit_cr = generate_data(ym_per_pix, xm_per_pix)
# Calculation of R_curve (radius of curvature)
left_curverad = ((1 + (2*left_fit_cr[0]*y_eval*ym_per_pix + left_fit_cr[1])**2)**1.5) / np.absolute(2*left_fit_cr[0])
right_curverad = ((1 + (2*right_fit_cr[0]*y_eval*ym_per_pix + right_fit_cr[1])**2)**1.5) / np.absolute(2*right_fit_cr[0])
return left_curverad, right_curverad
In [8]:
# func to find lane center to the car
def find_lane_center(binary_img, l_fit, r_fit):
h = binary_img.shape[0]
xm_per_pix = 3.7/700 # meters per pixel in x dimension
if r_fit is not None and l_fit is not None:
car_position = binary_img.shape[1]/2
l_fit_x_int = l_fit[0]*h**2 + l_fit[1]*h + l_fit[2]
r_fit_x_int = r_fit[0]*h**2 + r_fit[1]*h + r_fit[2]
lane_center_position = (r_fit_x_int + l_fit_x_int) /2
center_dist = (car_position - lane_center_position) * xm_per_pix
center_dist = (car_position - lane_center_position) * xm_per_pix
return center_dist
In [9]:
# func to draw the detected lanes on undistored/original image
# image: the original image to draw on
# return result, which is the overlapped lane detected image
def draw_detected_lane(warped,out_img,img,left_fitx, right_fitx, Minv):
stacked_img = np.dstack((warped, warped, warped))*255
num_rows = warped.shape[0]
img_size = (stacked_img.shape[1],stacked_img.shape[0])
y_points = np.linspace(0, num_rows-1, num_rows)
left_line_window = np.array(np.transpose(np.vstack([left_fitx, y_points])))
right_line_window = np.array(np.flipud(np.transpose(np.vstack([right_fitx, y_points]))))
line_points = np.vstack((left_line_window, right_line_window))
# Fills the area bounded by one or more polygons
# cv2.fillPoly(stacked_img, np.int_([line_points]), [0,255, 0])
cv2.fillPoly(out_img, np.int_([line_points]), [0,255, 0])
unwarped = cv2.warpPerspective(out_img, Minv, img_size , flags=cv2.INTER_LINEAR)
result = cv2.addWeighted(img, 1, unwarped, 0.3, 0) #img is the original image to draw on
return result
In [10]:
# func to put curvature and center to the lane data on the above lane detected image
def draw_data_on_lane(result_img,left_curverad, right_curverad, center_dist):
new_img = np.copy(result_img)
h = new_img.shape[0]
font = cv2.FONT_HERSHEY_DUPLEX
curv_radius = (left_curverad+ right_curverad)/2
text = 'Curve radius: ' + '{:04.2f}'.format(curv_radius) + 'm'
cv2.putText(new_img, text, (40,70), font, 1.5, (200,255,155), 2, cv2.LINE_AA)
direction = ''
if center_dist > 0:
direction = 'right'
elif center_dist < 0:
direction = 'left'
abs_center_dist = abs(center_dist)
text = '{:04.3f}'.format(abs_center_dist) + 'm ' + direction + ' of center'
cv2.putText(new_img, text, (40,120), font, 1.5, (200,255,155), 2, cv2.LINE_AA)
return new_img
In [11]:
# calibration camera, this is only needed for once to get the camera matrix M
# call this function before calling advanced_lane_finding function
vet,mtx,dist,rvecs,tvecs = camera_calibration()
def advanced_lane_finding(img):
global left_fit
global right_fit
# get color and gradient thresholded binary image that picked up lane lines
combined_binary = get_threshold(img,s_thresh=(130, 255), h_thresh=(15,100),sx_thresh=(20, 100))
# perform a perspective transform to get the birdview of lane lines
warped,Minv = warped_image(img, combined_binary)
# if the polynomial coefficients of the previous frame is None then sliding windows to search fitted lane line
# else if there are previous lane lines polynominal coefficients, then search a small margin for the current frame
if (left_fit is None) or (right_fit is None):
lane_detected_img,left_fitx,right_fitx,left_fit,right_fit,ploty = fit_polynomial_brute_search(warped)
else:
# Make sure to grab the actual values from the previous step in your project!
left_fit = np.array(left_fit)
right_fit = np.array(right_fit)
lane_detected_img,left_fitx,right_fitx,left_fit,right_fit,ploty = search_around_poly(warped,left_fit,right_fit)
# result_img = draw_detected_lane(warped,lane_detected_img,img,left_fitx, right_fitx, Minv)
# new_img = draw_data_on_lane(result_img,left_curverad, right_curverad, center_dist)
# sanity check goes here
# compute the radius of curvature
left_curverad,right_curverad = measure_curvature_real(left_fitx,right_fitx,ploty)
# compute the offset of lane center
center_dist = find_lane_center(warped,left_fit,right_fit)
# output lane detected poly drawing on the original image
result_img = draw_detected_lane(warped,lane_detected_img,img,left_fitx,right_fitx,Minv)
# output the lane detection, curvature and offset of lane center image
data_img = draw_data_on_lane(result_img,left_curverad,right_curverad,center_dist)
data_img = np.array(data_img)
return data_img,left_fit,right_fit
In [12]:
# global variables to store good found left and right lane lines
left_fit = None
right_fit = None
# test on first image
img = mpimg.imread('test_images/test2.jpg')
data_img,left_fit,right_fit =advanced_lane_finding(img)
# Plot the 2 images
f, (ax1, ax2) = plt.subplots(1, 2, figsize=(24, 9))
f.tight_layout()
ax1.imshow(img)
ax1.set_title('Original Image', fontsize=40)
ax2.imshow(data_img)
ax2.set_title('Processed Image', fontsize=40)
plt.subplots_adjust(left=0., right=1, top=0.9, bottom=0.)
In [13]:
# test on second image
img = mpimg.imread('test_images/test3.jpg')
data_img,left_fit,right_fit =advanced_lane_finding(img)
# Plot the 2 images
f, (ax1, ax2) = plt.subplots(1, 2, figsize=(24, 9))
f.tight_layout()
ax1.imshow(img)
ax1.set_title('Original Image', fontsize=40)
ax2.imshow(data_img)
ax2.set_title('Processed Second Image', fontsize=40)
plt.subplots_adjust(left=0., right=1, top=0.9, bottom=0.)
Test on Videos¶
In [14]:
# Import everything needed to edit/save/watch video clips
from moviepy.editor import VideoFileClip
from IPython.display import HTML
# global variables to store good found left and right lane lines
left_fit = None
right_fit = None
output_name = 'project_video_output2.mp4'
## To speed up the testing process you may want to try your pipeline on a shorter subclip of the video
## To do so add .subclip(start_second,end_second) to the end of the line below
## Where start_second and end_second are integer values representing the start and end of the subclip
## You may also uncomment the following line for a subclip of the first 5 seconds
#input_clip1 = VideoFileClip('project_video.mp4').subclip(0,5)
clip1 = VideoFileClip('project_video.mp4')
output = clip1.fl_image(advanced_lane_finding)
%time output.write_videofile(output_name, audio=False)
In [15]:
video_output_name_2 = 'project_video_long_output.mp4'
## To speed up the testing process you may want to try your pipeline on a shorter subclip of the video
## To do so add .subclip(start_second,end_second) to the end of the line below
## Where start_second and end_second are integer values representing the start and end of the subclip
## You may also uncomment the following line for a subclip of the first 5 seconds
# input_clip1 = VideoFileClip('project_video.mp4').subclip(0,5)
input_clip2 = VideoFileClip('project_video.mp4')
output_clip2 = input_clip2.fl_image(advanced_lane_finding)
%time output_clip2.write_videofile(video_output_name_2, audio=False)
In [16]:
# Import everything needed to edit/save/watch video clips
from moviepy.editor import VideoFileClip
from IPython.display import HTML
video_output_name_3 = 'challenge_video_long_output.mp4'
## To speed up the testing process you may want to try your pipeline on a shorter subclip of the video
## To do so add .subclip(start_second,end_second) to the end of the line below
## Where start_second and end_second are integer values representing the start and end of the subclip
## You may also uncomment the following line for a subclip of the first 5 seconds
#input_clip3 = VideoFileClip('challenge_video.mp4').subclip(0,5)
input_clip3 = VideoFileClip('challenge_video.mp4')
output_clip3 = input_clip3.fl_image(advanced_lane_finding)
%time output_clip3.write_videofile(video_output_name_3, audio=False)
In [ ]:
video_output_name_4 = 'harder_challenge_video_long_output.mp4'
## To speed up the testing process you may want to try your pipeline on a shorter subclip of the video
## To do so add .subclip(start_second,end_second) to the end of the line below
## Where start_second and end_second are integer values representing the start and end of the subclip
## You may also uncomment the following line for a subclip of the first 5 seconds
#input_clip3 = VideoFileClip('challenge_video.mp4').subclip(0,5)
input_clip4 = VideoFileClip('harder_challenge_video.mp4')
output_clip4 = input_clip4.fl_image(advanced_lane_finding)
%time output_clip4.write_videofile(video_output_name_4, audio=False)
In [ ]: